How much does a concrete driveway cost in Alabama?
National 2026 guides put concrete driveways at $8 to $20 per square foot installed, with the average project around $6,400. A 20-by-20 two-car pad runs roughly $3,200 to $6,000 in those guides, and Alabama pricing generally sits below national averages, so local quotes tend toward the lower half of the ranges.
Those are published market figures, not our rates. Our concrete driveway quotes come from measuring your actual site, but the tables below will put you in the right neighborhood before the first form board goes down.
What does size do to the number?
Square footage is the engine of the quote, and the guide math is straightforward:
| Driveway size | Square feet | 2026 guide range |
|---|---|---|
| 10 × 20 (single strip) | 200 | $1,600 to $3,000 |
| 12 × 24 | 288 | $2,300 to $4,300 |
| 20 × 20 (two-car pad) | 400 | $3,200 to $6,000 |
| 24 × 24 | 576 | $4,600 to $8,600 |
| 24 × 36 | 864 | $6,900 to $13,000 |
Rural South Alabama complicates the table in one direction: length. A county-road parcel with the house set back three hundred feet is not a 400-square-foot project, and at that scale many owners split the difference: concrete for the apron and parking near the house, gravel for the run. We build both, so the split gets priced both ways on paper.
Where does the money inside the quote actually go?
Roughly half to labor, per published breakdowns, and the rest to concrete and base. Ready-mix in Alabama runs materially cheaper than the national figure. State construction indexes put local ready-mix around $125 to $165 per cubic yard against $140 to $195 nationally, which is part of why our market prices well.
The line that separates a twenty-year driveway from a five-year one is the base. Concrete is only as good as the ground under it: topsoil stripped, grade shaped so water leaves, base material compacted properly. That is dirt work, and on our jobs it is part of the driveway scope, because a pour over soft ground is pre-cracked concrete with extra steps.
What do finishes add?
Guides price the ladder cleanly: plain finishes around $6 to $8 per square foot, broom-finished, colored, and exposed-aggregate around $8 to $12, and stamped or stained decorative work at $12 to $20. The plain note on upgrades: they are looks money, not lifespan money. Durability lives in thickness, base, and joint-cutting done on schedule; a plain broom finish on a proper base outlasts a stamped drive on a bad one every time.
For Gulf Coast conditions specifically, broom finish earns its popularity: the texture grips wet shoes and tires through nine months of rain season, which is worth more here than it costs.
How do you get a real number?
Measure or pace the route, note whether old concrete or heavy leveling is involved, and have it walked. Our quotes separate the dirt-work and the flatwork lines so you can compare bids line by line, name the thickness and finish, and hold unless the scope itself changes. If the smarter answer for your length is a concrete-plus-gravel split, we will say so with both numbers on paper.
If the drive you already have is cracked through, sunk at the apron or broken up, start with our concrete driveway repair and replacement page instead: a failed section can be saw-cut out at the joints and repoured on a rebuilt base without replacing the whole drive, and the cost guide above covers what a full repour runs.
Free estimates at (251) 747-7839, or start at the contact page.