Land Clearing
Full-property and lot clearing: trees, brush, undergrowth, fence lines, and right-of-way, hauled off or mulched in place and left build-ready.
Learn More
Most slab problems are dirt problems wearing a concrete disguise. A pad poured on soft, unprepared, or badly drained ground cracks and settles no matter how good the finish work was — and South Alabama ground, between sandy coastal soils and wet flatwoods, punishes shortcuts. We pour slabs and pads across Baldwin and Mobile County with the part most concrete-only outfits subcontract or skip: the dirt work underneath.
Shop floors, shed and barn pads, carport and RV pads, generator and equipment slabs, patio slabs — we cut the ground to grade, build and compact the base, form it, pour it, and finish it. One crew owns the whole stack, so when the slab is done there is no gap between the excavation contractor and the concrete contractor for problems to hide in.
Slab-ready also means thickness and reinforcement matched to the load: a 4-inch slab does fine under a shed, while anything carrying vehicles or equipment wants thicker concrete and rebar. We spec it to what the pad will actually hold — and if what you really need is a concrete driveway, that is its own service and we do that too.
Tell us about your project and we’ll get right back to you.
Concrete is only as good as what it sits on. We strip the topsoil and organics, cut to grade, and build a compacted base so the slab bears on ground that will not move — and we shape the surrounding grade so storm water runs away from the pad instead of under it. On this coast, where summer rain is a guarantee, that drainage detail is the difference between a slab that stays flat and one that tilts by year five.
Load decides the spec. Sheds and patios do fine on a standard 4-inch pour; vehicle and equipment pads want 5 to 6 inches with rebar. Published 2026 guides put installed slab work at about $6 to $12 per square foot, with thickness, reinforcement, and site prep moving the number. We break all three out in the quote so you can see what you are paying for.
The requests we see most: a slab for the metal building or workshop going up behind the house, a pad so the RV or boat stops sinking into the yard, barn and equipment pads on acreage, and generator pads going in ahead of hurricane season. Metal-building slabs get special attention on flatness and anchor-bolt layout so the erector has nothing to fight.
If the spot for your pad is currently trees, brush, or an old structure, we handle that too — clearing, demolition, and stump grubbing ahead of the dirt work, so the whole path from overgrown corner to finished slab is one phone number.
From the first walkthrough to the final one, here’s exactly how your project runs.
We come out and look at the actual ground: the growth, the slope, the wet spots and the access. We listen to what you want done and give you a clear, written estimate. No pressure and no phone-quote guessing.
We lock in a date, plan equipment access and where debris goes, and account for drainage and any lines or wetlands to protect. You know the plan before anything starts moving.
Our crew runs our own track loader and its attachments, keeps the site clean and keeps you posted. Decades of experience means we read the ground and adjust instead of tearing it up.
We walk the finished property with you, load out or mulch whatever the plan called for, and leave the ground clean, graded, and ready for whatever you are building next.
Common questions about concrete slabs across Baldwin & Mobile County. Don't see yours? Give us a call.
Full-property and lot clearing: trees, brush, undergrowth, fence lines, and right-of-way, hauled off or mulched in place and left build-ready.
Learn More
Brush, underbrush, and small trees ground into mulch in a single pass. No burning, no hauling, and a clean natural finish left behind.
Learn More
Site leveling, slope and drainage correction, building pads, driveway base, and cut-and-fill, all shaped to drain and hold on the rainy Gulf Coast.
Learn More
Foundation and footing digs, drainage work, culverts, utility trenching, and ditch cutting, dug to line and grade and hauled off clean.
Learn More
Driveway culverts and cross drains sized to the ditch, set at the right grade, and backfilled so the drive holds through Gulf Coast rain.
Learn More
Structure teardown, mobile home removal, concrete and slab tear-out, and outbuilding demolition, knocked down and hauled off in one job.
Learn MoreThree decades clearing, grading, and digging across Baldwin and Mobile County. Pine and hardwood, wet lowland, red clay and coastal sand each get worked their own way, so the ground drains and builds right.
Alabama Home Builder License #13967 and full insurance behind every job. Your property and your liability are covered.
You get a written estimate after an on-site look, with a plain-English price for the whole job. We tell you what the job really takes, then we show up and do it.
We run our own track loader with a forestry mulching head, a bucket and a bush hog, so we control the schedule and the quality of every job.
5.0 on Google, from real reviews on our Business Profile.
“Will does great work and is very dependable. He knows what to do and the best way to get it done. I can’t recommend him and his crew enough!”
“Great service! Fair pricing! Highly recommend”
“Great service, very reasonably priced. Trustworthy and friendly”

Concrete slab cost in Baldwin County for 2026: published prices per square foot and by size for shop, shed and RV pads, plus why the ground under them matters.
Read more →
What building pads cost in South Alabama in 2026: per-square-foot ranges, fill dirt prices, what makes a pad cheap or expensive, and how compaction protects the slab.
Read more →Need land cleared, a lot graded, a driveway put in, or a storm mess cleaned up? Reach out for a free, no-obligation estimate. We’ll look at the ground with you, give you a clear price, and get your job on the schedule.
Tell us about your project and we’ll get right back to you.